Bass pedalboard

Your bass pedalboard.Built around your rig.

A Noisewood works for a bass rig just as well as for guitar: a handmade double-deck wooden pedalboard with integrated 230V power and connections in the side panel, built around your rig.

Noble D340/350-P bass pedalboard with bass pedals on two decks, engraved Noisewood lid standing behind it
Noble D340/350-P bass pedalboard, top view of both decks with bass pedals
Model
Noble D340/350-P
Size
340 × 350 mm
Finish
Ultra Red Mahogany body, Stealth Black sides (custom finish)
Hardware
Silver and black, custom combination
Lid
Protective lid with Noisewood logo engraving
Extras
LED light
Connections
Power only: 230V inlet as standard

The example board

Inside this bass pedalboard.

This is a custom Noisewood Noble bass pedalboard, handmade in Belgium. Its two decks keep the pedals you step on within reach, with space underneath for gear you leave on.

  • TunerWalrus Audio Canvas Tuner
  • CompressorKeeley Bassist
  • OctaveMXR Bass Octave Deluxe
  • SynthMXR Bass Synth
  • FuzzDarkglass Duality Fuzz
  • Octave and distortionDarkglass Kaamos
  • Distortion and EQDarkglass Microtubes X Ultra
  • Preamp and DIWalrus Audio Mantle, under the top deck

A custom build, shown as an example of what a Noisewood can carry. The pedals are not made or sold by Noisewood and are not included.

Why it works for bass

Plug in & play.

Every board has a 230V inlet as standard. Add TRS and XLR connections in the wooden side panel, when you order or later.

Explore connections

Two decks

Your power supply, a preamp or DI and the cables go under the top deck, out of sight. Your pedals sit on two levels, easy to reach.

Power built in, as standard

Every board has a 230V inlet in the wooden side panel, as standard. Your power supply sits under the top deck and plugs into it. The power supply itself is not included.

Optional XLR outputs

The XLR package adds two XLR outputs on the left side, next to four TRS on the right. Connect the DI output of your preamp and go straight to the PA.

Optional four-TRS panel

The Essential package adds four TRS on the right side. Anything that runs over TRS, in or out: bass in, amp out, and room for whatever your rig needs.

Noble D340/350-P bass pedalboard with the top deck raised, integrated 230V inlet in the wooden side panel
Noble D340/350-P bass pedalboard with the top deck raised, bass preamp and power cable on the lower deck

Choose your line

Four lines, one build.

Every Noisewood is made to order in Belgium, in two depths and three widths. Choose a line, then your size, setup, finish and connections in the configurator.

No lid

  • Core D340/450 Stealth Black wooden pedalboard, front three-quarter viewCoreNatural Birch or Stealth BlackFrom €495 incl. VAT
  • Studio D340/450 Walnut wooden pedalboard, front three-quarter viewStudioWood stain finishFrom €595 incl. VAT

Build your CoreBuild your Studio

With protective lid

  • Tour D460/450 pedalboard, with the engraved lid standing behind itTourNatural Birch or Stealth BlackFrom €725 incl. VAT
  • Noble D460/600 pedalboard, with the engraved lid standing behind itNobleWood stain finishFrom €895 incl. VAT

Build your TourBuild your Noble

Questions about a bass pedalboard

Are the pedals included?

No. You get the pedalboard, built around your own pedals. The pedals on this page are an example setup.

Is a power supply included?

No. Every board has an integrated 230V inlet as standard. You mount your own power supply under the top deck; the inlet feeds it.

Which setup do I choose in the configurator?

Choose Only pedals as your setup. Using a bass multi-effect or modeler instead? Choose Modeler/Multi-Fx. Running a switcher or MIDI controller? Choose Switcher.

Which size do I need?

The example board is the smallest size, D340/350. More pedals or a larger preamp? Choose a wider board (450 or 600 mm) or a deeper one (460 mm).

What does a bass pedalboard cost?

A Core D340/350 for pedals starts at €524 incl. VAT (€433,06 excl. VAT): the Core from €495, plus €29 for the Only pedals setup. Size, finish, connections and options are added in the configurator, and the price updates with every choice.

Which connections do I need?

Power only gives you the 230V inlet. Essential adds four TRS on the right side. TRS adds one extra TRS on the left. XLR adds two XLR outputs on the left, for a DI to the desk. Need USB-C, MIDI or your own layout? Ask for a custom layout.

Can I add connections later?

Yes. Connection panels can be added or swapped later. Start with Power only and add a package when your rig needs it.

Your board

Your bass. Your pedals. Your board.

Made to order. Typical build time: 2–3 weeks.