For straightforward pedalboard setups.
Input/output, FX loop or amp switching.
- 4× TRS jacks
- 230V power inlet
4 TRS jacks
CONNECTIONS
Plug in
& play
Connect faster. Keep your cabling clean. Choose the connections that fit your rig.
CONNECTIONS
Part of the board. Not an add-on.
Your connections are integrated into the wooden side panel.
Clean, protected and built around your rig.
CONNECTION PACKAGES
Choose your connections.
The right side is the same in every package. The left side is where they differ.
Three packages add the connections your rig needs.
For switchers or more complex routing.
Ideal for 4-cable setups, with an extra TRS jack for amp switching or expression/volume.
- 4× TRS jacks
- 230V power inlet + 1× TRS jack
5 TRS jacks
For modelers and multi-FX.
Balanced outputs to a mixer, PA or audio interface.
- 4× TRS jacks
- 230V power inlet + 2× XLR out
4 TRS jacks + 2 XLR out
Click to enlarge
Custom connections
Need XLR, MIDI, USB-C, extra TRS or something different? We’ll build the connection panel around your rig.
Prefer no connection package?
No audio connections, a clean side panel with the engraved logo, and the integrated 230V power inlet.
Connections can be added later. The panel arrives wired, so you can swap it yourself.
Connection FAQ
Questions about
your connections
Which connection package should I choose?
Every package includes the same 4× TRS connection bay. What differs is what comes next to the power inlet.
Essential covers a straightforward board: input, output, an FX loop or amp switching. TRS adds one more jack, which is what you need for the four-cable method, an expression or volume pedal, or amp switching alongside your other connections. XLR adds two balanced outputs, for modelers and multi-FX going straight to a mixer, PA or audio interface.
Not sure? Take the package closest to your setup, or request a custom layout before you order.
Can I add connections later?
Yes. A board without a connection package ships with a blank plate, and that plate can be replaced with a connection package afterwards.
The new panel arrives fully wired, with a plug-in connection to the inside of the board, so you can swap it yourself. Get in touch and we confirm the right panel and its price for your board.
What if my setup does not fit one of the packages?
Then you request a custom layout. Tell us which connections your rig needs (TRS, XLR, MIDI, USB-C or anything else) and we build the panel for it.
We review your setup, check what is technically possible and confirm the layout and the price before production starts.
Can I choose where the connections are placed?
In most cases, yes. Connections can go in either side panel, depending on how your board is laid out.
The final position depends on the board size, the number of connections and the space inside the board. If you need a specific placement, request a custom layout so we can check it before production.
What is the difference between TRS and XLR?
TRS is the flexible one. The same jack carries a mono or stereo signal, a balanced line, an expression or volume pedal, tap tempo, or two switching functions for amp channel switching. It depends on what you plug into it.
XLR is the standard for balanced outputs to a mixer, PA, audio interface or FRFR monitor. It is what you want when a modeler or multi-FX unit goes straight to front of house or to your recording setup, without a DI box on the floor.
Which connectors do you use?
Professional-grade hardware throughout. The balanced outputs are Neutrik D-size XLR connectors, the same ones used in touring and studio installations.
Everything is mounted, wired and tested in our workshop. Engraved labels in the wood, one per connection, are available as an option.
